Quarter scale tiles

I have found the most wonderful tiles (and flooring) in quarter scale.

The vendor is an arm of Ann Marie Miniatures in the UK.  Dollhouse Flooring (Graham Simpkin).  They post worldwide for $4.

As many of you know I arrived back in the UK yesterday and in my mountain of mail was a little padded envelope containing these:

loose laid to show roughly what they will look like

to give you a sense of scale - they are 12 inch tiles in real life

the white marble I chose has a slight sheen

the contrast I chose is a biscuit coloured marble

I also have some cut diagonally across to make a triangular border around the edge of the room.  They are not destined for the opening in the Gate House as shown here but are for the entrance hall in Les Roches.  I began with the traditional black and white and then grey and white and then decided I wanted the house to feel light and warm and sunny so here we are.

The thinness of the material (a laminate) is perfect for the job.  I just love them and expect to love them more when they are all stuck down.

Take a minute to check the site there is masses and masses of choice of colours, patterns, materials, layouts - there has to be something you want.  I can see a zillion potential floors already for houses I haven't dreamed of yet.

Bought at Philly

If you want to see the things I bought at the Philly show for Les Roches and The Gatehouse, click here Dolls House Shows

Petworth's demi-lune table

Yesterday's first photo showing the chandeliers also shows a pair of demi-lune tables from Petworth Miniatures.

Note to any newbie be very careful about the first one or two choices of things to make.  I wasn't and was very nearly put of quarter scale by choosing a couple of things I really liked.  Sadly things you 'really like' are often attractive because they are a complicated structure and hence they are not for the faint-hearted (or newbie's).  I would say this table is in that category.  No way is it difficult - just a bit over-fiddly for someone who hasn't yet found their feet.  Gayle's products are so close to their life model that these pretty pieces will always be intricate.

almost there

The first challenge is shaping the legs.  Luckily for me the tables will be viewed from the front (no side view) so I only needed to shape the two front legs of each table.  Indeed decorative tables like these often only had the front leg shaped.  This photo shows you the sanding in progress.  It needs a much slimmer ankle.

There is a plethera of difficulties sanding and shaping a piece this size starting with the tools. I used just about everything in my sanding drawer settling mostly on a $3 set of very small different shaped (metal tool) files.

It is hard to see what shape you have achieved because you end up removing colour from the wood and that distorts you view of the outline.

The pieces are so small there is a very real chance of snapping something (other than your patience).

Don't be put off by this step; if you don't want to do it, the tables will look very nice with their legs as they are.  Indeed Regency were very plain - leave out the stretcher and leave the legs plain and they will be spot on.

picky, picky

This is another step you don't need to do, but I always think I have the kit so I might as well use it.  I assembled the pieces this far and left them on my magnetic jig to dry while I had lunch.  It does help me see that I have got things at right angles and it does actually put pressure on the joints though I suspect, at this scale, it won't make a scrap of difference.

showing you the stretcher underneath the table

This is the finished construction before I stained the pieces.  Those front legs still look chunky I may give them another going over but I will see how they look when stained. I also need to do something more with the nibs which fastened them in their frame - I was sure I had that OK.  Cameras are great for pointing out your failings.  No, really, they are a useful tool.  

one wet one dry

Test your stain colours on the frame they came from to see how they interact with that particular wood.  I ended up choosing red mahogany (Min-wax).  This is my least favourite colour but it looks OK on this wood.

I use stain pens and always stain before I assemble - except this time - I won't do this again, staining when the piece is built is decidedly more difficult.  I did see a tip from someone who said she dunked the finished pieces in the stain and then fished them out.  Great idea if you have tins of stain but I can't imagine ever needing that amount.  

The left one is dry and a nice muted colour - the one on the right is still wet and the colour I dislike.  If I were to varnish the piece it would get near to the colour of the wet one - it is the shine on the piece which is giving the red hue.  Old tables would not be varnished to a high shine, they might be french polished but I suspect these pieces would just be waxed to a soft sheen over the years so I am happy to go back in and tidy them up and gently buff them with brown paper and see what result I can get.  Matt or satin varnish can give a nice finish as it 'fills' the 'holes' in the wood, giving a nice smooth surface.  We'll see.

Google - 'Regency demi-lune images' - if you want loads of inspiration for finishing them.

More gold leaf pen and chandeliers

I know I finished the last post with the promise of saucepans next time but who wants saucepans when you can have chandeliers.?

click to enlarge

You may remember I recently got these from Petworth miniatures.  I had been looking for chandeliers for the salon and the dining room and generally haven't been able to find anything I like.  I have seen only one I liked but it would mean a second mortgage on my house so I gave up on that idea.

I then saw these by Petworth.  To be truthful I thought they looked a bit hefty and rather Tudor(ish) but thought I could maybe take a look and see if I could use them some other way if they wouldn't hack it.  No need to fear: Petworth being Petworth has come up trumps.

Those of you practiced in these arts and seeing the dressmakers' pin nearby have already grasped that they are a bit fiddly to assemble but are well worth the effort.

Handy tip as always - obey the experts.  Gayle suggests in her instructions that you hold the pieces as you cut through the tab which holds them in their frame so they don't ping away.  Why would someone as talented and intelligent as me need to do that?  Plus (using a magnifying glass to work with) the pieces are a fair size so not a problem!  Ping! one of the little candle cups (circle beneath the candle) 'disappeared'.  There is a propensity for these things to defy the space/time continuum and leave their frame as a giant gold circle and become the size of a speck of dust and change its colour to that of any background it chooses to land on.  It doesn't just land of course, it roams and when you find it you spend forever saying "How did it get there?".  Moral of this story:  Do as you are told by people who know better.

The secret of success with this piece is getting all the verticals vertical and all the horizontals horizontal and there are a lot of them.  Quick drying glue is pretty much a must and something to hang it on as it dries between steps.  This pin went into a piece of sytrene packing leaned up against a mug on my desk.

.....  and here it is finished and drying.  This picture doesn't improve much on the picture on the packet.  This small stuff is hellish to photograph flatteringly (kudos to those who do)  As always the real McCoy is so much nicer than this.  I am just a bit concerned that the small rooms of  Les Roches may not cope with a grand chandelier.  If not. it just means I will have to make something else some time to accommodate it.  My usual method of 'saving money' - to save wasting five dollars (cost of this item) I will spend a few hundred to wrap something around it.

The 'basket in the centre is just fabulous as it means I can light it with a chip LED.  I love this light.

Here's its little brother - no way to add a light to this, but as it is for the salon I can have wall lights, firelight, table lamps so not a problem.  Here in Florida many rooms don't have centre lights - why not the same (on this occasion) in France?

May second coat the gold and the candles and black tip the candles for a burned wick.

Mirror and gold leaf pen

This post is a double-up - showing you a lovely mirror kit from Petworth Miniatures and a terrific gold leaf pen from just about anywhere (Amazon in my case).

need another one

The mirror is a delight.  It is made (almost) like a real mirror.  Two pieces of wood for the frame and a very thin third frame for the front edge.  It is shaped and etched to resemble an impressively hefty gilt mirror.  Even the back is covered in paper.  I made it even more legitimate by using a bit of a brown paper bag.  The mirror glass is real glass so it has weight and depth and clear reflections.

The pen is superb.  It is about as close as you could get to gold leafing without actually having to do it.  In case you don't remember or haven't read my negative tale (of how I didn't get one from Jo-Ann's here are its details.

18 KT Gold Leafing Pen by Krylon.  Just Google it and you will get many hits.  Find the best deal (don't forget postage costs) and you'll be good to go.  I also bought the silver one at the same time for pots and pans - haven't tried that yet.  I think they have other metals too. Come back tomorrow when I do the pans.

Quarter scale section in DH&MS magazine

I am such a happy bunny.

It has taken me a while but I have finally persuaded my editor that quarter scale is a growing market (even in the UK) and we ought to commit to at least one quarter scale feature each month so that it is steady and regular for quarter scalers to find.

I am being offered one each for at least a year.

I don't doubt I can do one a month - already have so many stewing away - but I thought this was a good place to share this in case anyone out there has a burning desire to see something quarter scale in print.  Personally I think we need a whole magazine!

The magazine is a UK one - Dolls House & Miniature Scene - I will let you know when it happens - these things take months.

Treats - Suzanne and Andrews Miniatures

Away with the practical and on with the dreamy things....

Here are some purchases from Suzanne and Andrews Miniatures

The first is very simply some lovely detailed (deliberately large door handles).  Painted with brass paint they are perfect for a pub or shop or similar premises.  Not sure now I have them (and yes, I love them) that they will be right for my French front door as I had planned, but I do have a cunning plan to make them cast iron and use them in the Gate House instead.

click to enlarge

This is a clock which is just perfect for Les Roches.  I  just need to do a bit of research for the finish for it.

This is a very pretty selection of rugs printed on a nice weight cotton and will do well in all sorts of places.

I was looking forward to getting these as I am making flowers right now and I thought I would mass geraniums in them.  I still might but I am now considering other possibilities such as tall English lavender (the kit is in UK) or a couple of bay or olive topiaries - still to be figured out.

I saved the best, or maybe the most interesting, 'til last.  Their Lapin Sauté (leaping rabbit kits are based around a real restaurant of that name in Quebec which has a garland of terra cotta pots.  S & A have made it their own with a green garland hung with kitchen pots and pans.

This is great for me.  I want a bunch of kitchen stuff just to have in my stash ready for any project so all this will come in really handy and I want to make climbing roses or clematis on a trellis (or two) and I think the leafy swag is going to be perfect.  So as far as I am concerned I have three kits here for $10.  Good stuff.....  Oh, nearly forgot there is a useful piece of wood in there too.

For those of you who like useless information the name of the real restaurant is probably a play on the words of a children's rhyme/game/song.  Obviously they also offer rabbit dishes (sauté de lapin etc) but the name of the restaurant must evoke memories of the playground game of Le Lapin Sauté for some French people?

Le petit lapin or Le Lapin Sauté (The Little Rabbit)

Ronde à choix (Circle Game)

Un petit lapin est au centre de la ronde et les danseurs tournent autour de lui en chantant: (A little rabbit is in the center of the circle and the other children go around him singing:)

Mon petit lapin a bien du chagrin (My little rabbit is very sad)
Il ne saute plus, ne danse plus dans mon jardin (He no longer hops, no longer dances in my garden)

Puis la ronde s’arrête et les danseurs poursuivent la chanson en frappant dans leurs mains, tandis que le petit lapin se met à sauter au centre. (Then the children stop dancing around, and continue singing and clapping their hands and the little rabbit in the middle starts hopping.)

Saute, saute, saute, mon petit lapin (Hop, hop, hop, my little rabbit)
Et va-vite embrasser quelqu’un (And go quickly kiss someone)

Sur cette invitation, le petit lapin choisit un (ou une) des danseurs, l’embrasse et celui-ci le remplace dans le rôle du lapin au centre de la ronde. (At this invitation, the little rabbit chooses one of the other children , kisses him/her and that child takes the role of rabbit in the center.)